Product Overview
The Schneider Electric LMC100CAA10000 is a PacDrive 3 LMC Eco logic and machine controller designed for automation applications that do not require synchronized Sercos servo-axis control. It combines PLC logic, local digital I/O, industrial communication and machine-control functions in a compact cabinet-mounted unit. Although the controller includes Sercos communication interfaces, the LMC100 version has a maximum synchronized servo-axis capacity of 0 axes.
The exact commercial reference is LMC100CAA10000. LMC100 is only the family designation and should not be used as the complete orderable model. This product is a discontinued legacy controller, and Schneider Electric does not currently list a direct replacement. Machine replacement therefore requires verification of the complete controller project, firmware, hardware revision and installed communication configuration.
Main Features
- Exact commercial reference: LMC100CAA10000
- PacDrive 3 LMC Eco logic and machine controller
- Maximum synchronized Sercos servo-axis capacity: 0 axes
- Intel Atom 1.6 GHz processor with 512 KB L2 cache
- 512 MB DDR2 working memory
- 128 kB non-volatile memory
- SD memory card support for controller project and system data
- 24 VDC rated supply voltage
- Approximately 30 W power consumption
- Eight standard digital inputs
- Four high-speed touch-probe inputs
- Eight digital outputs
- Integrated Sercos, Ethernet, CANopen, serial and USB interfaces
- Master encoder interface for machine synchronization signals
- Passive cooling with IP20 cabinet-mounted construction
Technical Specifications
| Model |
LMC100CAA10000 |
| Brand |
Schneider Electric |
| Series |
PacDrive 3 LMC Eco |
| Product Type |
Logic and Machine Controller |
| Controller Designation |
LMC100 |
| Maximum Sercos Servo Axes |
0 synchronized servo axes |
| Configuration |
Basic configuration without optional communication module |
| Processor |
Intel Atom 1.6 GHz with 512 KB L2 cache |
| RAM |
512 MB DDR2 |
| NVRAM |
128 kB |
| Memory Card |
SD card, minimum 512 MB; confirm installed card and project backup |
| Rated Supply Voltage |
24 VDC |
| Power Consumption |
Approximately 30 W |
| Digital Inputs |
8 standard inputs plus 4 touch-probe inputs |
| Digital Outputs |
8 digital outputs |
| Sercos Interface |
2 * RJ45 |
| Ethernet Interface |
1 * RJ45 10/100BASE-T |
| Serial Interface |
1 * RJ45 RS232/RS485 |
| CAN Interface |
1 * SUB-D9 CAN/CANopen |
| USB Interface |
1 * USB Type-A |
| Master Encoder Interface |
1 * RJ45 |
| Programming Languages |
FBD, SFC, ST, CFC, LD and IL |
| Real-Time Operating System |
VxWorks with SEAutomation Kernel |
| Cooling Method |
Passive cooling |
| Protection Rating |
IP20 |
| Operating Temperature |
5–55 °C |
| Dimensions |
Approximately 44 * 270 * 222 mm |
| Approximate Net Weight |
2.2 kg |
| Lifecycle Status |
Discontinued legacy product |
| Direct Replacement |
No direct replacement currently listed; confirm by installed machine |
Compatible System and Applications
The LMC100CAA10000 is intended for PacDrive 3 automation systems that require PLC logic, machine sequencing, local digital I/O and industrial communication but do not require synchronized Sercos servo-axis control from the controller. Typical applications may include auxiliary machine control, conveyor sequencing, packaging-machine logic, process coordination, communication gateways and replacement of an existing LMC100 installation.
The controller may communicate with peripheral equipment through Ethernet, CANopen, RS232/RS485 and optional communication modules. Compatibility must be confirmed by the installed controller project, firmware version, fieldbus configuration, I/O wiring and machine software. The presence of Sercos interfaces does not change the LMC100 maximum synchronized servo-axis capacity of 0 axes.
Maintenance and Replacement Notes
Before replacing an existing controller, verify the complete model, commercial reference, nameplate, hardware revision, firmware and controller project. Back up the SD memory card and machine program before disconnecting the original unit. Confirm the Ethernet settings, CANopen node configuration, serial communication parameters, Sercos wiring, master encoder interface, digital I/O assignments and optional communication module.
The LMC100CAA10000 should not be replaced automatically by an LMC201, LMC212, LMC216, LMC300, LMC400 or LMC600 controller. These models may have different axis capacities, processor performance, firmware requirements, communication options and project compatibility. A migration may require software conversion, electrical changes and commissioning work.
At complete machine level, verify the controller project, communication network, cable set, connected I/O, servo drive configuration, motor matching, brake option, encoder type and shaft configuration before quotation or replacement.
Related Models
Related PacDrive 3 LMC Eco controllers include LMC201CAA10000, LMC212CAA10000 and LMC216CAA10000. Related higher-performance controller families include Schneider PacDrive LMC300, LMC400 and LMC600 motion controllers.
Compatible accessory references may include VW3E704000000 Profibus DP communication module, VW3E704100000 real-time Ethernet communication module, VW3E6019 connector and Sercos cable kit, and VW3E70360AA00 SD memory card. Accessories should be verified separately and should not be treated as controller variants or direct controller replacements.
Inquiry and Supply Notes
Please provide the complete commercial reference, clear nameplate photographs, hardware revision, firmware information and controller-project details when requesting a quotation. Also confirm whether the original SD card, connector kit and optional communication module are required.
Because this is a discontinued legacy controller with no direct replacement currently listed, availability, product condition, firmware, included accessories, testing status and delivery time must be confirmed before quotation.
|
|
Schneider Electric LMC100CAA10000 PacDrive 3 LMC Eco Motion Controller Images
|
