Product Overview
The Schneider Electric LMC600CBB10000 is a PacDrive 3 LMC600 high-performance logic motion controller supplied with an OM-C CAN communication option module. It supports up to 99 coordinated Sercos servo or robot axes while integrating PLC logic, motion control, digital and analog I/O, fieldbus communication and machine diagnostics.
The OM-C option provides an additional CAN communication channel for machines containing CAN-based peripheral equipment or legacy fieldbus devices. The complete LMC600CBB10000 commercial reference must be checked because the option-module configuration is part of the controller package and may affect the installed project and network configuration.
Main Features
- Exact commercial reference: LMC600CBB10000
- PacDrive 3 LMC600 logic motion controller
- Maximum capacity of 99 synchronized Sercos servo or robot axes
- Accessory Kit supplied with OM-C option module
- Additional CAN communication capability
- Intel Pentium M 2.0 GHz processor
- 2 MB L2 processor cache
- 256 kB NVRAM
- CompactFlash card project storage
- 24 VDC rated supply voltage
- Integrated Sercos, Ethernet, RT-Ethernet, CAN/CANopen and Profibus DP communication
- 20 digital inputs and 4 interrupt inputs
- 16 Touch-Probe inputs and 16 digital outputs
- Two analog inputs and two analog outputs
- Temperature-controlled fan cooling
- Cabinet-mounted IP20 design
Technical Specifications
| Model |
LMC600CBB10000 |
| Series |
PacDrive 3 LMC Pro |
| Product Type |
Logic Motion Controller |
| Accessory Package |
Accessory Kit with OM-C |
| Included Option Module |
OM-C CAN communication module |
| UPS Included |
No |
| Maximum Servo or Robot Axes |
99 Sercos axes |
| Processor |
Intel Pentium M 2.0 GHz |
| Processor Cache |
2 MB L2 cache |
| Controller Memory |
Confirm by hardware revision and nameplate; published specifications vary between controller revisions |
| NVRAM |
256 kB |
| Storage |
CompactFlash card, minimum 128 MB |
| Operating System |
VxWorks with SEAutomation Kernel |
| Programming Languages |
LD, CFC, SFC, IL, FBD and ST |
| Rated Supply |
24 VDC |
| Digital Inputs |
20 |
| Interrupt Inputs |
4 |
| Touch-Probe Inputs |
16 |
| Digital Outputs |
16, maximum 250 mA per output |
| Analog Inputs |
2, voltage or current configurable, 12-bit |
| Analog Outputs |
2 voltage outputs, 12-bit |
| Motion Network |
2 * RJ45 Sercos |
| Standard Ethernet |
1 * RJ45 10/100BASE-T |
| Real-Time Ethernet |
2 * RJ45 |
| Integrated CAN / CANopen |
1 * SUB-D9 |
| Additional CAN Interface |
OM-C option module |
| Profibus DP |
1 * SUB-D9 master/slave interface |
| Serial Interfaces |
RS232 and RS422/RS485 |
| USB |
USB 2.0 Type-A host |
| Option-Module Slots |
2; one slot occupied by OM-C in this package |
| Cooling |
Temperature-controlled fan |
| Protection Rating |
IP20 |
| Dimensions |
Approximately 100 * 310 * 243 mm |
| Approximate Net Weight |
3.5 kg before kit-specific accessories |
| Country of Origin |
France |
| Lifecycle |
Discontinued legacy product |
Compatible System and Applications
The LMC600CBB10000 is suitable for complex PacDrive 3 machines requiring up to 99 synchronized axes together with additional CAN communication. Applications may include high-speed packaging systems, multi-station production equipment, robotic handling cells, printing machinery and machines containing CAN-connected I/O, drives or peripheral devices.
The OM-C module uses controller communication resources and must be configured in the controller project. CAN protocol, node addresses, baud rate, terminating resistors, cable topology and connected devices must be verified before installation or replacement.
Maintenance and Replacement Notes
Verify the complete LMC600CBB10000 reference and confirm that the original controller contains the OM-C option module. Record the installed slot position, CAN network parameters, node addresses and cable connections before removing the controller.
Back up the CompactFlash card and controller project. Confirm firmware, hardware revision, controller memory, Sercos configuration, Ethernet settings, Profibus network, digital and analog I/O assignments and master-encoder connections.
The basic LMC600CAA10000 is not an automatic replacement because it does not include the same OM-C accessory package. Migration to LMC802 or another controller platform requires software, firmware, fieldbus and application-level verification.
Related Models
LMC600CAA10000 is the basic version without an additional option module. LMC600CBI10000 combines OM-C CAN and OM-NE RT-Ethernet modules. UPS-equipped CAN versions include LMC600CCB10000 with OM-C and LMC600CCI10000 with OM-C plus OM-NE.
Other communication versions include LMC600CBC10000 with OM-P Profibus DP, LMC600CBD10000 with OM-NE RT-Ethernet and LMC600CBL10000 with OM-P plus OM-NE.
Inquiry and Supply Notes
Please provide the complete commercial reference, controller nameplate, firmware version and details of the installed CAN network. Confirm whether the original CompactFlash card, OM-C module, connector set and project backup are required.
Option-module hardware code, slot assignment, product condition, testing status, included accessories, availability and delivery time must be confirmed before quotation.
|
|
Schneider Electric LMC600CBB10000 PacDrive 3 LMC600 Motion Controller Images
|
