Product Overview
The Schneider Electric LMC600CCA10000 is a PacDrive 3 LMC600 high-performance logic motion controller supplied in the UPS Accessory Kit configuration. It supports synchronized control of up to 99 Sercos servo or robot axes and combines PLC logic, motion processing, industrial communication, integrated I/O and machine diagnostics.
The UPS accessory configuration distinguishes LMC600CCA10000 from the basic LMC600CAA10000 package. An internal battery pack can support the controller during a power interruption, allowing controller data to be retained or the machine application to perform a controlled shutdown according to the installed project.
The UPS battery condition, charging system, wiring and shutdown configuration must be verified before the controller is quoted or used as a replacement.
Main Features
- Exact commercial reference: LMC600CCA10000
- PacDrive 3 LMC600 logic motion controller
- UPS Accessory Kit configuration
- Maximum capacity of 99 synchronized Sercos axes
- No additional OM-C, OM-P or OM-NE module in the basic CCA package
- Intel Pentium M 2.0 GHz processor
- 2 MB L2 processor cache
- 256 kB NVRAM
- CompactFlash card project storage
- 24 VDC rated controller supply
- Integrated Sercos, Ethernet, RT-Ethernet, CANopen and Profibus DP interfaces
- 20 digital inputs and 4 interrupt inputs
- 16 Touch-Probe inputs and 16 digital outputs
- Two analog inputs and two analog outputs
- Temperature-controlled fan cooling
- Four-line diagnostic display
Technical Specifications
| Model |
LMC600CCA10000 |
| Series |
PacDrive 3 LMC Pro |
| Product Type |
Logic Motion Controller |
| Accessory Package |
UPS Accessory Kit |
| UPS Included |
Yes; verify actual included battery and accessories |
| Additional Option Module |
None in the basic CCA configuration |
| Maximum Servo or Robot Axes |
99 Sercos axes |
| Processor |
Intel Pentium M 2.0 GHz |
| Processor Cache |
2 MB L2 cache |
| Controller Memory |
Confirm by hardware revision and nameplate |
| NVRAM |
256 kB |
| Storage |
CompactFlash card, minimum 128 MB |
| Operating System |
VxWorks with SEAutomation Kernel |
| Programming Languages |
LD, CFC, SFC, IL, FBD and ST |
| Rated Supply Voltage |
24 VDC |
| UPS Function |
Internal battery-pack support for temporary uninterruptible controller supply |
| Digital Inputs |
20 standard inputs |
| Interrupt Inputs |
4 high-speed inputs |
| Touch-Probe Inputs |
16 |
| Digital Outputs |
16, maximum 250 mA per output |
| Analog Inputs |
2, voltage or current configurable, 12-bit |
| Analog Outputs |
2 voltage outputs, 12-bit |
| Sercos |
2 * RJ45 |
| Standard Ethernet |
1 * RJ45 10/100BASE-T |
| Real-Time Ethernet |
2 * RJ45 |
| CAN / CANopen |
1 * SUB-D9 |
| Profibus DP |
1 * SUB-D9 master/slave interface |
| Serial Interfaces |
RS232 and RS422/RS485 |
| USB |
USB 2.0 Type-A host |
| Option-Module Slots |
2 |
| Cooling |
Temperature-controlled fan |
| Diagnostic Display |
4 * 20 character alphanumeric display |
| Protection Rating |
IP20 |
| Operating Temperature |
Confirm according to the UPS kit and installed controller revision |
| Dimensions |
Approximately 100 * 310 * 243 mm |
| Approximate Net Weight |
3.5 kg before UPS kit accessories |
| Country of Origin |
France |
| Lifecycle |
Discontinued legacy product |
Compatible System and Applications
The LMC600CCA10000 is intended for complex PacDrive 3 machines requiring up to 99 synchronized motion axes and controlled operation during short supply interruptions. Typical applications include high-speed packaging lines, robotic handling systems, printing and converting machines, automated assembly lines and production equipment where controller-project protection or an orderly shutdown is important.
The UPS function must be integrated into the machine power-loss strategy. Battery capacity, charging condition, shutdown timing, CompactFlash data and machine application must be reviewed together.
Maintenance and Replacement Notes
Before replacing the controller, verify the complete LMC600CCA10000 reference, UPS accessory configuration, battery condition, hardware revision, firmware and CompactFlash project. Record the UPS wiring and machine shutdown sequence before disconnecting the original unit.
Inspect the battery pack for age, damage and reduced capacity. Confirm the 24 VDC supply, charging circuit, Sercos topology, Ethernet configuration, CANopen and Profibus networks, I/O wiring, master encoder and complete cable set.
The non-UPS LMC600CAA10000 is not an automatic replacement because it does not provide the same power-loss handling configuration. Migration to LMC802 or another platform requires verification of the UPS strategy, software project, firmware, fieldbus configuration and machine commissioning requirements.
Related Models
Other UPS configurations include LMC600CCB10000 with OM-C CAN, LMC600CCC10000 with OM-P Profibus DP, LMC600CCD10000 with one OM-NE RT-Ethernet module, LMC600CCG10000 with two OM-NE modules, LMC600CCI10000 with OM-C plus OM-NE and LMC600CCL10000 with OM-P plus OM-NE.
LMC600CAA10000 is the corresponding basic non-UPS version. Standard communication variants include LMC600CBB10000, LMC600CBC10000 and LMC600CBD10000.
Inquiry and Supply Notes
Please provide the complete commercial reference, clear nameplate photographs, UPS battery photographs, hardware revision, firmware and controller-project information. Confirm whether the CompactFlash card, battery pack, connector set and other UPS accessories are required.
Battery condition, charging performance, included components, controller memory revision, testing status, availability and delivery time must be confirmed before quotation.
|
|
Schneider Electric LMC600CCA10000 PacDrive 3 LMC600 Motion Controller Images
|
