Product Overview
The Dynisco PT4624-15M-6/18-SIL2 is a high-range two-wire melt-pressure transmitter with a nominal 0 to 15,000 psi measuring range and 4-20 mA output. It is intended for demanding polymer processes where pressure must be transmitted over an industrial current loop to the control system.
The rigid-stem and flexible-capillary configuration allows the electronics housing to be positioned away from the hot process connection. The high range and SIL2 designation require careful verification of pressure scaling, safety documentation and mechanical installation.
Main Product Information
| Complete Model |
PT4624-15M-6/18-SIL2 |
| Pressure Range |
0 to 15,000 psi |
| Output Signal |
Two-wire 4-20 mA |
| Process Thread |
1/2-20 UNF |
| Mechanical Design |
Rigid stem with flexible capillary |
| Safety Configuration |
SIL2 device configuration |
| Maximum Diaphragm Temperature |
Up to 400 degrees C |
High-Range Measurement Notes
A 15,000 psi transmitter must be paired with an analog input and software scale configured for that full range. Selecting an unnecessarily high range can reduce useful resolution, while selecting too low a range can expose the diaphragm to overload. Actual operating and transient pressures should be reviewed.
Typical Applications
- High-pressure polymer extrusion
- Melt-pump discharge monitoring
- High-viscosity compounding processes
- Filtration and screen-change systems
- Pressure shutdown and machine-protection functions
Replacement and Safety Checklist
Confirm pressure range, system maximum pressure, 4-20 mA scaling, supply voltage, loop load, process connection, stem arrangement, connector pinout and SIL documentation. The complete safety loop must be validated by the responsible machine or process engineer.
Inquiry and Supply Notes
Provide the nameplate, process-pressure data, PLC input specification and required safety documentation before quotation.
