Product Overview
IAI SCON-C-100A-CC-0-2 is a legacy single-axis servo actuator controller equipped with a CC-Link industrial communication interface. It is designed to control a matching IAI actuator while exchanging movement commands, position data, completion status and alarm information with a compatible PLC or CC-Link master.
The controller is primarily required for maintaining existing production machines that use the original SCON-C hardware, actuator configuration and CC-Link communication structure. Exact model matching is important because visually similar SCON controllers may use different actuator capacities, feedback systems, interfaces, firmware and option codes.
Main Features
- Single-axis control for a matching IAI servo actuator
- 100A actuator and feedback configuration code
- Integrated CC-Link industrial network interface
- Supports network-based positioning commands and status monitoring
- Provides operating, position-complete and alarm information
- Suitable for legacy equipment maintenance and automation restoration
- Requires verification of the complete controller and actuator configuration
Technical Specifications
| Brand |
IAI |
| Model |
SCON-C-100A-CC-0-2 |
| Controller Series |
SCON-C |
| Product Type |
Single-Axis Servo Actuator Controller |
| Controlled Axes |
1 Axis |
| Actuator / Feedback Code |
100A |
| Control Method |
Field Network Positioning Control |
| Network Code |
CC |
| Communication Interface |
CC-Link |
| Configuration Suffix |
0-2 |
| Power Requirement |
Confirm Exact Controller Nameplate |
| Compatible Equipment |
Matching IAI Servo Actuator |
Related Models
Related IAI family variant: SCON-C-400A-CC-0-2. This controller uses the same SCON-C family and CC-0-2 communication pattern but has a different actuator capacity code. It is listed for family reference and must not be considered a direct replacement for SCON-C-100A-CC-0-2.
Confirm the complete model code, actuator capacity, motor and encoder configuration, controller input power, firmware, CC-Link settings, connectors and stored parameters before selecting either model.
Compatible Systems and Applications
The SCON-C-100A-CC-0-2 can be found in automated assembly machinery, transfer equipment, packaging systems, inspection stations, loading mechanisms and production fixtures. CC-Link communication allows the machine PLC to coordinate actuator motion with sensors, I/O modules and other industrial devices on the same network.
Depending on the original machine configuration, the PLC may use the controller for stored-position selection, movement commands, direct numerical data, operating-status monitoring or alarm reporting. Existing PLC data assignments should be recorded before replacement.
Maintenance and Replacement Notes
IAI lists the SCON-C family under discontinued and obsolete controller documentation, so this model should be treated as a legacy replacement product. A newer SCON-CB or SCON2 controller must not be assumed to be a direct replacement without reviewing actuator compatibility, electrical connections, network configuration, firmware and parameter conversion requirements.
Before removing the original controller, back up the position table and operating parameters whenever possible. Record the CC-Link station number, communication speed, PLC register mapping and network configuration. Verify the connected actuator nameplate, controller power input, feedback code, connector arrangement and option suffixes.
Inquiry and Supply Notes
Please provide photographs of the complete SCON-C controller label, connected actuator nameplate and CC-Link terminals when requesting a quotation. Product condition, included connectors, parameter service, firmware, warranty and delivery time should be confirmed before purchase.
|
|
IAI SCON-C-100A-CC-0-2 CC-Link Single-Axis Controller Images
|
