FANUC A02B-0303-C074 10.4-Inch Color LCD Unit
Product Overview
The FANUC A02B-0303-C074 is a 10.4-inch color LCD operator-interface display identified as a B1 panel for FANUC 30i CNC control applications. This configuration is specified without an integrated touch panel.
The unit presents CNC status information, programs, alarms, parameters and machine-operation screens. It is normally installed as part of a complete machine operator station and should be selected by the exact FANUC part number rather than screen size alone.
Key Product Features
- 10.4-inch industrial color LCD display
- B1 operator-interface panel configuration
- Designed for FANUC 30i CNC control applications
- Non-touch display configuration
- Suitable for maintenance of an existing CNC operator station
Technical Identification
| Manufacturer |
FANUC |
| Part Number |
A02B-0303-C074 |
| Product Type |
LCD Display / Operator Interface |
| Display Size |
10.4 Inch |
| Display Technology |
Color LCD |
| Panel Configuration |
B1 Panel |
| Touch Function |
Not Included |
| Control Family |
FANUC 30i |
Typical Applications
- CNC machining-center operator stations
- CNC turning and milling machine displays
- Replacement of a failed or damaged LCD operator-interface unit
- Legacy FANUC 30i control maintenance
Related and Nearby Models
Related A02B-0303 display and operator-interface references include A02B-0303-C073, A02B-0303-C074, A02B-0303-C081, A02B-0303-C084, A02B-0303-C091 and A02B-0303-C092.
These neighboring models may differ in screen configuration, touch capability, panel generation, graphics functions, mounting arrangement and rear connectors. A02B-0303-C084 is frequently marketed as another 10.4-inch display variant, but its touch configuration is described inconsistently in the replacement market. None of these neighboring models should be treated as a direct substitute for A02B-0303-C074 without machine-level verification.
Ordering Checklist
- Confirm the exact part number A02B-0303-C074.
- Verify that the required configuration is B1 without touch.
- Compare all rear connectors and mounting points.
- Check the CNC control model and machine-builder configuration.
- Confirm whether the quotation covers the complete display unit.
Supply Condition Notice
New, new-surplus, refurbished and used units must be quoted separately. Product photographs, nameplate information and operating condition should be confirmed before shipment.
